JD M Fan Hub

abrahamseven · Oct 5, 2012

Ok, I bought a new Fan Hub for my John Deere M Model from the Smart Farmer on e bay, I just got around to installing it. Well, I will be darn, it is about 1/8 inch too long and the fan rubs on the radiator. My question is Where can I buy an original one new or have my old one fitted with a bearing so it won't need oil . I have tried o rings and such and it still leaks, I am at a loss. Any Ideas? Appreciate any comments.

steve

Hotflashjr · Oct 6, 2012

Is it the fan they are selling on there that isn't stock and looks like
its off a kubota diesel?

Your local machine shop should be able to help you out and do
something to fit a sealed bearing in there one way or another. I
would think you would have to do some welding or changes to an
original fan assembly to make it work. I can't remember anyone
posting on here they have done that before.

leon · Oct 6, 2012

As I recall I had a problem like that on my Super C Farmall when trying to use a new-manufactured will-fitter's hub with sealed bearings. I ended up returning that and got a replacement original hub. Incidentally, the hub in my Deere MT, and probably your M, look exactly like the one in my Super C. Follow the operator's manual for filling and draining the excess oil out of the hub and you may not have a problem

Tech 7 · Oct 6, 2012

Too late to help you now but the one I bought from this site a number of years back fit and worked well.

James Howell · Oct 6, 2012

Replaced the fan assembly on "Sam" one of our 51MTs.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/John%20Deere%20Equipment/SAM/?action=viewÂ¤t=IMG_1033-1.jpg" target="_blank">

IMG_1033-1.jpg" width="650" border="0" alt="Photobucket

</a>

Bought a new fan assembly from <a href="http://external_link.com/">Sharp's Tractor</a>.

It was a simple bolt on replacement.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/John%20Deere%20Equipment/SAM/?action=viewÂ¤t=IMG_1036-2.jpg" target="_blank">

IMG_1036-2.jpg" width="650" border="0" alt="Photobucket

</a>

Filled it with oil and no leaks to date.

Used Gates fan belts.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/John%20Deere%20Equipment/SAM/?action=viewÂ¤t=IMG_1032-1Copy.jpg" target="_blank">

IMG_1032-1Copy.jpg" width="650" border="0" alt="IMG_1032-1 Copy

</a>

Hope this helps.

Mike M · Oct 6, 2012

I think M & MT fans might be different and the repops may
not make both? I posted on here several times the oil seal
number I expoxed onto the back of my M fan and it sealed it
up.

JD M Fan Hub

abrahamseven

Member

Hotflashjr

Well-known Member

leon

Well-known Member

Tech 7

Well-known Member

James Howell

Well-known Member

Mike M

Well-known Member

Similar threads