3020 2nd hyd svc

How much work would it be to add a 2nd svc to the 3020 need it to run the round bailer would like to keep it like the one thaths already factory on there now
 
The linkage is easier on that style, best bet is a salvage yard, you will need a valve and a coupler, it"s best to run hoses back down to the coupler, maybe put a JIC type splice in the area where the tractor will split to make it easier later. OR a fause valve...
 
I have a good SCV off my 4020 (dash style). I have advertised it with no luck. I was toying with the idea of putting it on my 2510. Modern view tells you where I am.
 
(quoted from post at 07:00:44 10/02/12) I have a good SCV off my 4020 (dash style). I have advertised it with no luck. I was toying with the idea of putting it on my 2510. Modern view tells you where I am.
What are you asking for it and how much of the set up for it do you have Thanks Doug R
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top