jeffcat

Well-known Member
Here is an olde. Does anyone know where to get the old 117volt heater elements that used to be in room reflective type heaters. Also incubators used them. I can remember them as a kid in the neighbors chicken house to keep the chicks warm. They are made out of ceramic and are a long thin cone taper in shape. The nichrome wire is wraped around the out side. This thing screws in to a standard light bulb socket. Look on Ebay at item #230909582801. This is the room heater. I need a few of them to build something. Thanks folks Jeffcat
 
Sounds like what I have sitting on a shelf in the other room. Cone shape with a wire warped around it and looks like a heating element in many electric heaters
 
Those are the ones I use in a nut dryer and a food dryer. WOW,, they sure aren't as cheap as they used to be. But, what is? A friend has a couple of these on his motor test station for testing electric motors. I don't know of any other type of heater that would screw into a regular light socket.
 
WOW WOW!! Yes thanks guys this is them. Boy they do cost a little bit don"t they! I want to have a couple to screw into a "tester" for when I show my old generators at engine shows. Should be impressive after dusk! I didn"t know they came in a bunch of sizes. Just make sure you don"t touch!!! They bite. Thanks again! Jeffcat
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top