Metric drain plug in parts washer

wsmm

Member
My parts washer has a M16 - 1.50 plug in it for draining. I'd like to put in a drain valve or some type of assembly or fitting that would allow me to drain it without removing just the bolt type plug and having it all run out at once with no control. Also don't need to get the solvent bath that happens when you first remove the plug. Any idea of what to use or where to purchase it at?
Thanks
Bill
 
An auto parts store may have one for use in a car. Those quick drain plugs are more common in ag though so they are probably all standard.
 
Get a hose barb fitting, and put a hose in the drain port. You can get a hose barb shut off valve, and put that in the end of the hose, and then you would have absolute control of where it is pointing as it drains.
 
(quoted from post at 20:57:52 01/12/13) My parts washer has a M16 - 1.50 plug in it for draining. I'd like to put in a drain valve or some type of assembly or fitting that would allow me to drain it without removing just the bolt type plug and having it all run out at once with no control. Also don't need to get the solvent bath that happens when you first remove the plug. Any idea of what to use or where to purchase it at?
Thanks
Bill

If you have 12 bucks to spare... Fram makes'em in all sizes... I despise them tho the customer never leaves me the adapter to drain them with...

http://www.oreillyauto.com/site/c/d...h_02330_1078905_-1&pt=02330&ppt=C0023

Nother search

http://www.amazon.com/Fumoto-F-106-Engine-Drain-Valve/dp/B003OXUPOQ/ref=pd_sim_sbs_auto_2
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top