611 ignition key, where to order one?

pcweber · Mar 23, 2014

So I left the key in my stuff for years till one time a neighbor who never talks to me came by and could not find me but decided the key being in my skid loader and me not using it meant he could go ahead and take it and leave a note that he did. Anyhow, so I have been taking the keys out more. Well long story short now for the life of me I cant find the old key for the 611B. Are those old Case tractor keys all the same and if so, where can I order one?

Case Nutty 1660 · Mar 23, 2014

does it look like this? it could have a different style as well

pcweber · Mar 23, 2014

No, but that is just like my big mower and old IH skid loader key.

mEl · Mar 23, 2014

IIRC most 611b tractors took the split type key with 2 prongs that fit into the switch, I think our dealership has new in stock as we stock most keys. The one shown is the "Indak" key and was used by numerous manufacturers and is common in new unit to this day.

Call 570 435 2921 and ask for Denny, explain what you have and he will look it up. Hopefully no one has transplanted a non standard or universal switch in place of the stock one.

mEl

pcweber · Mar 23, 2014

Yes mEl, your description sounds spot on. thanks

Case Nutty 1660 · Mar 23, 2014

that would have been the next one mEl thanks I could not think how to describe it

1031D · Mar 23, 2014

(quoted from post at 17:43:36 03/23/14) Yes mEl, your description sounds spot on. thanks

Mel's description is that of a common key to Massey also.

pcweber · Mar 23, 2014

Actually, if you mean split down middle that is not it. My Case key if I recall was like an "F" with both bars of the "F" being the same length, not a longer end bar and shorter middle bar. That make sense/ sound familiar?

Case Nutty 1660 · Mar 23, 2014

like this one?

pcweber · Mar 23, 2014

no pic/ cant see it?

pcweber · Mar 23, 2014

OK, can now see it. No, that is actually functionally cut the same as the first one you posted. Mine is like an "F" with one side all flat.

Case Nutty 1660 · Mar 23, 2014

is it curved if you look at it from the end? I am NO drawer but some thing like this?

mEl · Mar 23, 2014

(quoted from post at 18:40:45 03/23/14) is it curved if you look at it from the end? I am NO drawer but some thing like this?

G15470 should be the key number if the switch has not been changed out, you can look it up on Case ag parts and blow up the page and get a look at it. That is the key I recall for those tractors.

mEl

pcweber · Mar 23, 2014

OK, here is my turn at drawing it from what I recall.

pcweber · Mar 23, 2014

anther try at the pic... This look familiar?

mEl · Mar 23, 2014

(quoted from post at 19:24:45 03/23/14) anther try at the pic... This look familiar?

If the key looks like that it is a non standard dswitch an all bets are off. The key for those standard switches were split down the middle with a little shallower cut at the back and the switch viewed looking at the face has 2 slightly bigger notchers at the edge for the two prongs to enter.

mEl

Dean Griffin · Mar 24, 2014

This is the key to my Case 600B

mEl · Mar 24, 2014

That is the key , I am trying to import a pic from my cell phone but you saved me the trouble. We have the JD equivalent in stock. I have a Case one on my personal key ring. If the drawing is representative of the key he needs he does not have an OEM switch. Thank you Dean.
mEl

pcweber · Mar 24, 2014

no, that split key is not it. OK, may be time for a new ignition... or wait a little longer to run across it. Getting old, forgetting where I put things...

1031D · Mar 25, 2014

(quoted from post at 14:45:09 03/24/14) This is the key to my Case 600B

This key is common to Massey stuff.

611 ignition key, where to order one?

Member

Well-known Member

Member

Well-known Member

Member

Well-known Member

Well-known Member

Member

Well-known Member

Member

Member

Well-known Member

Well-known Member

Member

Member

Well-known Member

New User

Well-known Member

Member

Well-known Member

Similar threads