Grain Drill help

Please help identifying this grain drill. I am new at this and have racked my brains trying to identify the brand.
a149853.jpg

a149853.jpg
[size=18:61f355bd75][/size:61f355bd75]
 
i am not shure but the first thing i would do is look all over the casting parts and see if you can find any letters of jd ih aneagle new ideal that is what i have found in the past
 
Have never seen one with a drive shaft located like that so I do not think it is of a major brand, more like a reganial short line model. A location might help with that.
 
I'm not sure..I would have to see other angles..but it sure looks like my old IH Model 10 with out the grass seed box... The frames that hold/support the disk units look like a IH model 10..
 
for tubes i would use a rubber hose it could be a cockshutt be my best guess it been a few years since we got rid of ours so i'm just not sure but it sure is close if not
 
Back in the 90s had an older neighbor who had one. Only one I've ever seen. Glad to help. Maybe the universal rubber tubes sold by Shoup will work on it.
 
Looks like it is a Canadian Drill as Cockshutts were made in Canada. It would also have to be one of the latest models made. Try looking up the International Cockshutt Club. They might have a member that would know something about it. I could get the club address if wanted.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top