Antique CASE grain drill parts

jason6586 · Jun 17, 2013

Hello,

I just picked up a vintage case 10' grain drill that I am looking for parts for. This is a low rubber drill and im guessing its from the 50's. I did take one set of discs off and there is a left and a right with a coarse thread part that screws into the casting with a square hole in it. I cant seem to find a model number anywhere on this drill. Does anyone know if there are parts available somewhere along with where a guy could find a seeding chart. Any information at all would be great. I am looking for basic items such as discs and seed tubes.

Thanks

1031D · Jun 17, 2013

Your drill is most likely a model L. I have a bunch of used parts but nothing extra for double disk openers.

jason6586 · Jun 17, 2013

Do you know if there is anything available or a
place that may have used ones?

Thanks

John Saeli · Jun 17, 2013

Disc"s are no problem. Universal Seed Tubes should do the trick.

jason6586 · Jun 17, 2013

Where would I find the discs, with the mounting hardware. These dont seem to have bearings, they have bushings on each side and you tighten up a coarse threaded hub on the inside with a square hole to tighten. I wish i could figure out how to post a picture of them

rich10e · Jun 17, 2013

Where are you and how many you need?If its an L I have a parts drill,I could spare a couple discs

jason6586 · Jun 17, 2013

Hello,

Thanks for the reply, I am in WI and need at least two right side discs (Different threads). They would fit into a USPS flat rate box and I would be glad to pay the shipping if they were the right ones

rich10e · Jun 18, 2013

Get me your cell no. I'll take a pic and you can see if its what you need

jason6586 · Jun 18, 2013

You can give me a call at 715-797-6586

Thanks

Antique CASE grain drill parts

jason6586

New User

1031D

Well-known Member

jason6586

New User

John Saeli

Well-known Member

jason6586

New User

rich10e

Member

jason6586

New User

rich10e

Member

jason6586

New User

Similar threads