(800) 853-2651
SHOP NOW

730 hydralics

A

Anonymous-0

Well-known Member
I have a 730 comfort king that I just bought but the three
point has no power to lift anything I changed the oil and
filter but it didnt help any help on where to start would be
appreciated
 
I really hope some of the others will jump in that know more then i but I will try to help.

Do you have an IT service manual for your tractor? (If not this site may sell what you need)

Do you have hydraulic pressure at the outlets?

You can rig up a gauge to a male tip and check the hydraulic pressure by moving one of the outlet spool levers.

If you have NO pressure at the outlets then you need to gravitate towards the pump, pump drive and pump inlet seal.

If you have pressure then you should gravitate towards the control spool for the 3PT and/or possible problem with the piston on the 3PT lift.

Its kind of hard to write down everything that you would need to do but generally your pointed in one direction or the other.
 
Search the site. Its been a topic many times. I have personally had troubles with the 3 point valve, the sumP screen blocked not allowing any flow, and most recently had the cylinder in the rockshaft housing broke out. Not all the same tractor but my experience with 3 point problems has been enough for me!
 
You must log in or register to reply here.

Similar threads

J
Case 930 LP
Replies
6
Views
421
jpesping
J
Tgrasher
Case 800B exhaust manifold holes in bottom
Replies
4
Views
236
nick831
N
L
Case 830 COM Comfort King
Replies
6
Views
628
munson1086
M
H
favorite and least favorite
Replies
15
Views
567
Bill in Colo
B
C
68 Case 730 Diesel
Replies
2
Views
239
Cg19
C
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top