(800) 853-2651
SHOP NOW

Ford Quick Attach loader seal kit

R

Ron-MO

Member
I have a Ford model 7210 loader which I am in need of rebuilding a lift cylinder. According to one dealer list price of kit is about $50 for a SML36848 kit. Just wondering if these cylinders might also be used on other equipment and if a cross reference might exist with a less expensive alternative. Cylinder starting pouring oil out on down stroke this morning. I know I have seen very similar looking loaders on many different loaders and I would think this cylinder might be common.
 
$50 is not out of line for an OEM seal kit, especially when you can have it in probably 2 days without any shipping cost if ordered on a daily stock order. Many simple kits are now over $100 buy part number. Easiest way to save $$$ is to take the cylinder to a local hydraulics shop, or tear it down and order components from a place like Hercules. The 7210 loader was made for Ford by Schwartz (SMC) maybe you can source a kit from them.
Hercules
 
Try this place. They will have the parts on hand just bring your seals in and they will have them. I use them all the time. Also would take the piston and end cap of the cylinder with you for measuring. Very good people. They will also repair the whole cylinder for you. The even have chrome shafting and can make a new shaft for you. Check them out on the Web. Hope I have helped!

Yarbrough's Machine Shop CO Inc

514 North Fremont Avenue
Springfield MO 65802
(417)869-5344
 
As noted already... the kit price is not out of line AT ALL... at least compared to others that are regularly over 100 from CNH for those Schwartz loaders. You could go to a local hydraulic shop... but they generally want to do the work and that will be over 200.
These cylinders just use standard vee packing and a large o-ring on the gland where it seals against the barrell...

Rod
 
You must log in or register to reply here.

Similar threads

M
Du All 250 front bucket cylinder seal kit
Replies
5
Views
305
mailman1
M
D
Ford 735 loader lift cylinder
Replies
5
Views
171
Delion
D
C
1964 ford 2000 unknown front loader
Replies
7
Views
564
Muir hill 101
M
W
Quick attach for a 236 loader
Replies
6
Views
273
Jim.ME
J
G
4500 Loader Bucket Tilt Hydraulic Cylinder Seal Kit
Replies
5
Views
455
Check Break
C
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top