Disk ID

IAtractorKid · Oct 3, 2012

Hey guys! Dad has this old disc and wants to know what brand/model it is so we can an owners and parts manual for it. Im thinking its a Kewanee 130. IIRC its 12 or 13 feet wide. Need to replace a bearing or two, and some discs. Also need the smaller turn-in disks on the rear gangs. Thanks!

jon f mn · Oct 3, 2012

Definately a Keewanee, probly a 130 depending on if it has sealed bearings or bushings. We had one just like it. They called it a 13 1/2 ft. If it has sealed bearings you can get them at napa, blades are standard with 1 1/4 square shaft.

Jerry Coulter · Oct 4, 2012

That is a 100 series Kewanee disk. If it has 11 blades per axle, 44 in all, it would be a model 144. I have some old dealer material, a parts book for sure.

IAtractorKid · Oct 4, 2012

Yep 11 disks per gang so it must be a 144! Would definately be interested in an owners and parts manual for it if you have them and were wanting to sell. My email is open. Thanks!

Disk ID

IAtractorKid

Member

jon f mn

Well-known Member

Jerry Coulter

Member

IAtractorKid

Member

Similar threads