bale wagon users? If any

Strikefalcon · Sep 21, 2012

Hi does anyone use a NH 1012 bale wagon? Would you recommend using one? Best way to unload?

Thanks

jim_uny · Sep 21, 2012

i have nh 1033 balewagon. i unload in my hay barn. it works best if there is a smooth flat surface with slight incline downhill. must have a good wall to prop up against and push off. outside near at elevator use a kicker rack.

patiolant · Sep 21, 2012

And you need a baler that makes perfectly shaped, consistently sized bales.

DeltaRed · Sep 21, 2012

Couple pics for you

IAtractorKid · Sep 22, 2012

We have used a 1010, 1030 and 1034. All great units and a great investment especially if you are short handed. No complaints with any of them. If your going to drop the stack and leave it, I would recommend a 3-wide or at the very least the auto-tie feature to help hold the stack together. Buy an operators manual and follow the tips for setting a stack and you wont have a problem. Some models have push off feet and some dont, I would not worry weather they are there or not. Can set a good stack with or without them. You will have go.have a good baler though! The bales must be consistent in length and packed tightly otherwise the wagon will have trouble picking them up and tripping tables. The heavier the bale the better! Humidity and rusty tables can cause the bales to not slide easily and give you some fits but you will get that figured out.

Bottom line, buy it! You wont know how you got along without.it!

Jerry/MT · Sep 22, 2012

Nice looking hay!

bale wagon users? If any

Strikefalcon

Member

jim_uny

Member

patiolant

Member

DeltaRed

Well-known Member

IAtractorKid

Member

Jerry/MT

Well-known Member

Similar threads