Please Identify This Plow

bordermen

Member
I just bought my first tractor, a Farmall A and it came with this plow. Can anyone identify it? I has these two sets of numbers on it: P022253 and P02559. It also came with the below brackets. Can someone please show me how to mount it to my A? Thanks!

IMG_2980.jpg


IMG_2979.jpg


IMG_2978.jpg
 
Looks like the standard single furrow plow for a Farmall A. It the long shank is because it is pulled from the mounting points behind the front axle, with shock-absorbing spring. It is lifted from the rear. I do not have a electronic version of the manual. IH Geelong (Australia) also used the same plow for the Farmall Super A with modifications to allow depth setting and lifting using the Touch-Control. In the US, the Farmall Super A used a new plow with shorter shank attached to the drawbar reversed under the back of the tractor, similar to that for the Farmall Cub
 
still no takers on showing me how to hook this up? i think one of the brackets is part of the hand lift? am i right?
 
does anyone have a diagram or book that shows how to hook it up and/or what bracket parts i need?




(quoted from post at 13:45:45 01/15/12) Looks like the standard single furrow plow for a Farmall A. It the long shank is because it is pulled from the mounting points behind the front axle, with shock-absorbing spring. It is lifted from the rear. I do not have a electronic version of the manual. IH Geelong (Australia) also used the same plow for the Farmall Super A with modifications to allow depth setting and lifting using the Touch-Control. In the US, the Farmall Super A used a new plow with shorter shank attached to the drawbar reversed under the back of the tractor, similar to that for the Farmall Cub
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top