rod questio

no both rod ends are larger on the big cranks,
1370/1470/1570/2390/2590/2470/2670 all have big cranks 2090/2290/2094/2294 have the small cranks
 
Wanted to add I just tossed a set out of a 22 this week your welcome to have if you want something to play with.
 
Just call 507 926 5229 if you want them. They are on the old parts pile outside, snow could hide them for awhile.
 
I did a 930 once, there are many things that need changing over if you are going to use the newer heads. When you bore the block you will hit the water pump a bit in the front hole. It won't cut enough to hurt water pumping, but it can walk the boring machine because it only hits on the front. If that happens you can use JB weld on the bottom cut and recut it, I know that for a fact. lol. You will need rocker arms, push rods and I remember a problem with using 2090 sleeves but I don't remember why. I used them from a 1370. The head bolts are an issue because the 30's are to long and the 70/90's are larger diameter. There will also be an extra head bolt on the newer heads, I just plugged it with a frost plug.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top