Manure Loader

rusty6

Well-known Member
Has anyone ever seen one of these attachments for the DC4 tractor? I picked one up out of the junk at my uncle's farm years ago and assume he took it off his DC3 tractor. I'm thinking there must be more to it than what is shown in the picture. I have not tried attaching it to my DC4
12584.jpg
12585.jpg
 
it's a Hyd "Bail Lift" for implements, first generation was operated by the "Motor Lift" this was second generation next came the "Eagle Hitch" I have several of these on "SC/DC" tractors the only implement I have is a two-way one bottom plow cnt
 
yes they do I forgot I have a cultivator for this style and "Motor Lift" style also, they had quite a few implements that hooked up this way, planters, Listers are a few more I can think of right now cnt
 
That's an intresting picture,I'm working on an old SC that has one of those lifts,he must have converted it for a loader.
 
I have a 2 row lister corn planter that is lifted by the lifting bail. The lifting bail on the DC it is mounted on is hyd. cylinder operated. We have lifting bails on older tractors that operate from the motor lift. Cultivated a lot of corn with a SC and DC with motor lift. Come to the end and hit the motor lift with your heel ,turn around, drop and go.
 
(quoted from post at 14:43:47 12/04/12) it's a Hyd "Bail Lift" for implements, first generation was operated by the "Motor Lift" this was second generation next came the "Eagle Hitch" I have several of these on "SC/DC" tractors the only implement I have is a two-way one bottom plow cnt
So I was just mis-led by the heading on the service bulletin. That had me confused. I think I have the hyd cylinder from it too. It was shorter than the usual 8 inch stroke. My uncle used that cylinder for the table lilft on his pull type Case K2 combine for years. Many years later I salvaged that cylinder to use on the three point hitch that I built for my Cockshutt 40. Those Case hyd cylinders were good quality. After all these years it does not leak at all.
 
Guys, I found one of them cleaning another container. I knew it was a lift. Anyone interested in it? Just sitting around. I also found a complete 3 PT Eagle hitch for a SC or DC that was in another container.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top