800 caseomatic eagle hitch

gene watkins · Oct 4, 2012

59 caseomatic eagle hitch. how do i ck oil in rockshaft and or add oil? there is no petcock on the block,but there is an allen plug under manifold will that drain block? thanks for all the help.

Adirondack case guy · Oct 4, 2012

I have been around Case tractors since childhood. I might be a bit dense sometimes, but I have no idea what you are refering to. The 800 has a external 3pt lift cylinder and no rockshaft housing, just a cast block that supports the 3pt rockshaft that has greese jerks that lube it. You got pics. of what you are refering to?
Loren

Gene Dotson · Oct 4, 2012

Hydraulic oil level is checked on lower right side of the hydraulic housing. It is a 1/8 inch pipe plug. Engine coolant is drained through a 1/4 inch pipe plug in the bottom of the oil filter housing.

Gene

gene watkins · Oct 4, 2012

i am sorry if i stated rockshaft wrong. on the last page of the c 201 case shop manual fig c718 it says install 1 pint of sae 90 transmission oil in the rockshaft housing. i could not find grease fittings or a plug. sorry about the screw up .

INCase · Oct 5, 2012

there is a petcock on the side of the oil filter mounting plate/assembly that will drain the block.

800 caseomatic eagle hitch

gene watkins

Member

Adirondack case guy

Well-known Member

Gene Dotson

Well-known Member

gene watkins

Member

INCase

Well-known Member

Similar threads