770 hydraulics

Anonymous-0 · Apr 1, 2014

Well looking for advice here. Had trouble hooking up
remotes on my haybine but had a cylinder on my discs
that the oliver would run . I switched the haybine
to the same pioneer ends now I can't plug them in .
I did also change the hydraulic oil in between.

Mike in MI · Apr 1, 2014

Not sure if this could be your problem? Sometimes right after I start my 880 I can't plug in the couplers. Had to let it sit for a while.
Mike

Row Crop · Apr 2, 2014

I figured out years ago it's always easier to plug in hydraulic hoses to the tractor if you shut off the tractor first.

J. W. Schwiebert · Apr 2, 2014

Is there a load on the cylinder? Remember has check valves in the hydraulic system that will trap fluid pressure.

Anonymous-0 · Apr 2, 2014

Thanx for input but I tried with no load and tractor shutdown . I've been fooling with equipment for 35 years ,this is my first oliver though.

770 hydraulics

Anonymous-0

Well-known Member

Mike in MI

Member

Row Crop

Member

J. W. Schwiebert

Member

Anonymous-0

Well-known Member

Similar threads