power block pistons

You should be able to get new rings from Hastings. Measure the old ones for width. Also look closely at the top ring groove as most are worn. If so, have the groove widened and put a wider ring there. I think stock wrist pins will work, but been a while since I had one in my hand. Got several pistons for an A/60 in the shed but will be next week before I get a chance to look at them. Mike
 
Standard bore M&W style G pistons will work but the tops need to be machined to fit into the smaller bore of the power block. Also the block will have to be bored .125" over.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top