farmall rd406

Anonymous-0

Well-known Member
what is involved in putting a RD 406 in a 560? are they really 190 hp stock? dont know much about them, what kind of carb intake and manifold would i run? i got a 301 in it now. thanks
 
From what I understand it takes an adapter plate to bolt it to the clutch housing. Floyd Isabell in PA sells them. I think alot of guys who do the swap build a custom frontend because of interference problems with the crank pulley. On the manifold I think Isabell sells an adapter to flip the down draft manifold over. I'm not an IH guy this info is all just what I've heard.

1966-72 406's were 193hp @ 3200rpm

1973-74 406's were 160hp @ 2700rpm

The engine I had for sale is a 1969 model.
 
560GasPuller, call Adam Fish@ 570-337-2253 or Ryan Messner@ 570-419-7576 They just did this conversion this past summer. Both central PA guys.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top