Late JD B stroker crank

hey guys, Wondering if anyone has a stroked crank for a late B. looking for 6.5" or 7". On a limited budget and thought maybe someone has one they took out to go bigger etc?

thanks!

You have the correct idea...!

Have you looked at "Extreme's" site..??

He has some BIG Blocks for these, too..!

Ron..

"limited budget" usually does not entail spending 4000+ on a new block... why are you such an advocate for Ray anyways? you're always on here advertising for him; i've got nothing but jerked around by the guy.

Dane, start by sending some good parts. You ordered a head/pistons/rods, then found out that your block was junk.

Should have told you that you bought the parts, they are yours, when you found out your block was junk, instead bent over backwards to fix your old junk block for you for 1/2 what I should charge you and didn't ask for any money up front. That won't happen again.

You're welcome to come get your head/rods/pistons any time.

So, yeah, your block is taking longer than I wanted to, it's also a lot bigger than you intended to get.

if the block was such junk, why did you ask me to send it down to fix? if it was such a hassle why didn't you just tell me "tough luck" and let me not bore a block at all like I decided to do once I went through 2 bad blocks? how is telling me it will take 4 weeks to do that particular project (which looking back now you KNEW wasn't even possible) and it taking over 6 months, bending over backwards for me? Don't get mad with ME because whatever is going on down there is not working in your favor, which in turn means not in my favor either.

Ray, I appreciate you wanting to help me out with this block situation but so far you haven't. I have had a tractor sitting in pieces since May waiting specifically for this block. you offered to do it for a cheaper price and I agreed to that because I didn't think it would give you leverage now to excuse this situation. looking back I would have paid your full charge IF it would have been done in your advertised time frame.

Oh and I paid you for those other parts AND for you to ship them, yet every time I ask for them you tell I can get them with this block that is always "almost done". I've told you this more than once, all I want anymore is an HONEST answer from you on WHEN this will all be finished and what is the hold up since your projected schedule is far overdue. I didn't want this to get nasty, but I find it ridiculous for someone to have to wait this long for a service/product from a business, no matter who or what it is.

Is it RAY taking to long or where RAY "farmed" out your parts.

Same old story from the same couple of jerks, eh Ray...

Ron..

PLEASE explain how I am the "jerk" in this situation?