S88 input shaft

Schim

Member
A couple threads below I posted about my S88 input shaft. Schwiebert wanted some pics so here they are. The one on the right is my good one the difference would be that it is about 1/4" longer and the good one also has 2 extra grooves in it. Think this will work in my S88?
a93150.jpg

a93151.jpg
 
I wanted to see the end behind the gear. The extra groove is for the snap ring that holds the gear in place that drives the mechanical lift which has to be gone when the tractor has hydraulics. I have an apointment real quick, if you have more questions or a better picture post it. Later. J.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top