Anonymous-0

Well-known Member
I bought a super 55 a couple mos. ago, engine was stuck, cracked sleeve and lots of rust 3 1/2" bore 1 hole kit is $250 easy choice, do all four. 3 5/8" or 3 3/4" if I go with the 3 3/4" will I gain any H.P with the larger bore? over the 3 5/8 Next question is will I have any trouble keeping it cool? It is a non pressure system. Also I am looking for a top link for 3 point and a 3 point 2 bottom plow in So Mn. thanks
 
We run the 3-3/4 kit in our 77, same motor just 2 more holes. We have had no issues at all. However, I will say that if you do not do any thing else, then the HP will be very close between the 3-5/8 and the 3-3/4 kits.

Rich
 
Click the link and scroll down. Complete set of four 3 5/8th for $320. I just bought a set a few weeks ago. They've got the 3 3/4 too,I went with 3 5/8.
Korves
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top