front hydraulic pump drive hub adaptor

I couldn't edit my previous post for the freeman loader posting. Anyways, link_disallowed parts ABC1812 has 1" splineI.D.,10 splines, 2 3/4"c.c. bolt holes, 4" o/a dia., 7/16" bolt holes. Use on ABC1814 pump drive shaft (9 3/8" long, pulley end= 1"O.D. x 10 splines, pump end = 3/4 O.D. w/ 3/16" x 3/4" keyway. Crankshaft pulley MFS112, 3/4" belt groove width, and 4 7/16"-14NC threaded holes. Center to center measurement across the threaded holes is 2 3/4" c.c.. Sorry for the delay in changing my first post. Trouble finding my manual. This might be only for older ferguson models??? TE20, TO20, TO30
 
Ok we may be getting somewhere now. Thank you I will check it out. I also put the word out on the ford forum as I understand that one that worked on a 165 may have also been used on 3 or 4000's. Thanks again.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top