crank pulley drive hub for freeman loader

Anonymous-0

Well-known Member
Trying to locate 4 bolt 10 splined drive hub for 165 diesel.
Massey still carries the left hand threaed hub, and shaft but they do not match up w/ the keyed shaft on the front mtd.pump. Having one made may be an option but would rather find the right "stuff" if possible.
 
Very common part for the old fords and I think the same as what your looking for. I just did some work on a ford where the loader mount bolts broke and the shaft get snapped off so had o replace that and it has the same set up and had no problem finding it. This site also is likely to handle the hub and shaft.
 
thanks for the reply. The part # I need is 3616151. Also, would you happen to carry the drive shaft? One particular site showed two different lengths, 14-1/8 and 15-7/8. These were both left hand thread shafts. I alredy have a 17-1/4 shaft (splined) that would work. Thanks again.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top