44 MH Clevite Rings

Anonymous-0 · Nov 8, 2012

Helping Neighbor put rings and sleeves in H-260 He got set from Online source. The oil ring concerns me as it has a 6 sided Expansion ring that goes under the Oil ring itself, then it has a thin ring above and below the ring.Problem is it is so stiff with that expansion ring under it I don't think it can be compressed enough to fit. These sleeves came properly packaged with a ring set in each box. I have sleeved a number of other engines and usually they go together a lot more smoothly. He got no printed directions, Your Help is Requested.

H. DeBruhl · Nov 8, 2012

Hello,

You may not need the two thin rings. I just rebuilt a 44-6 motor and had the same problem. Talked to Jerry at Montes Equipment (1-800-228-2625) and he explained to me their use and application situation. Ended up not needing them. I would give him a call and tell him what you have run into. I"m sure he will be glad to help and get you back on track.

Hope this helps

44 MH Clevite Rings

Anonymous-0

Well-known Member

H. DeBruhl

Member

Similar threads