Oil on brake lining of MF 35

Gary Collier · Oct 31, 2012

which oil seal needs to be changed when there is oil on the brake lining?

AndyS · Oct 31, 2012

You really should replace both the inner and outer seals to prevent oil from getting to the brakes. However, it is the inner seal that prevents the hydraulic fluid from getting to the bearings and eventually washing the grease through the outer seal on to the brakes. The inner seal is easy to get to and replace. The outer seal is much harder to get to because there is a band that needs to be cut off the axle as well as pulling the bearings off the axle shaft. You could try the inner seal first and see if it solves your problem.

samn40 · Nov 1, 2012

As Andy says fit the seal in the axle tubing and repack your wheel bearings with grease. Normally that sorts it!
Sam

Oil on brake lining of MF 35

Gary Collier

New User

AndyS

New User

samn40

Well-known Member

Similar threads