Mike in MI
Member
Thanks Ken Combs on the cam bearings Info. I got the bearings in the mail today and there the wide width bearing.
I also learned someting today. I found out there is a front & rear brging.
I was wondering why one was notched and other wasn"t notched.
Cam won"t go in with rear bearing installed on govenor side. (cam lobe hits inner bearing I.D.)
Got to have the notched outside bearing for it to slide in enough so the rear part of the cam would drop off the bearing for it to clear the cam lobe.
Hopefully everthing else goes back together ok.
Mike
I also learned someting today. I found out there is a front & rear brging.
I was wondering why one was notched and other wasn"t notched.
Cam won"t go in with rear bearing installed on govenor side. (cam lobe hits inner bearing I.D.)
Got to have the notched outside bearing for it to slide in enough so the rear part of the cam would drop off the bearing for it to clear the cam lobe.
Hopefully everthing else goes back together ok.
Mike