Tony in Mass.
Well-known Member
Hey 2 tractors... when it is time to do a spindle... put it off till cooler weather. I started this Sunday evening... just taking apart the easy stuff and studying the job... yesterday I suffered in heat as bad as what you all get down there... and just now got back to it to the point of putting the hub on next chance I get.... but this was a fight not suited to the present climate. Should have done this when it was 10 in the sunshine...
The brass you see is swiped from my winter hobby in the cellar. This is thin sheets for the model railroad that became shims for the spindle. That and grease.... it looks as if no one in 55 years ever stuck a grease gun on the zerk. This tractor had a hard life in all sorts of weather...
The brass you see is swiped from my winter hobby in the cellar. This is thin sheets for the model railroad that became shims for the spindle. That and grease.... it looks as if no one in 55 years ever stuck a grease gun on the zerk. This tractor had a hard life in all sorts of weather...