Hey All - I read through the shop manual for my TO-30 and I followed the instructions for adjusting the toe-in on the front tires. I loosened the 2 screws on either side of the steering column and positioned the two steering arms in the same spot above the foot rests. Then I connected the drag links and positioned the tires so the distance at the front and rear of the tires was within 1/4". I then tightened the screws on the steering column so the steering wheel was tight. Next, I tested my adjustment by turning the steering wheel to the left and right and re-measured the distance at the front and rear of the tires and it was off by 1 1/2". I was thinking my toe-in was off because I tested on a hard surface while the tractor was not rolling, so the tires were a little locked up on the cement surface. Anyone think there is a larger problem here? Thanks.