Radius Arm Bolts

Terry G

Member
Does anyone know where to get the the 5/8 x 5-5/16 NF bolts (part #353642X1)that go through the radius arms and front axle extension on a TO-20. Sparex shows them as part #S.53802 but they only sell wholesale. I am planning on ordering axle bushing and pin from this site and would like to replace these bolts at the same time.
 
This site is a Sparex dealer also or at least used to be so call your order in and tell the parts guys what bolts you need also.
 
Any Agco dealer can get Sparex parts. Beware of the axle pin from this site. I ordered one from here and it was wrong. There is a thread on it on this board. If I was you I would either get a pin from Sparex or Agco. I got mine from Agco and it was $7.00 more than the wrong A&I pin from this site, and the Agco is a much better made piece.
 
Jason, could you tell me what was wrong with the pin you ordered so I can watch for that. I know the Ferguson parts manual shows three different ones for the TO-20. One of them matches the dimensions of mine although it has a 1" crank hole where my old one has a 3/4" crank hole.
 

Try this link. If it doesn't work search for the thread...." time to buy a sparex pin"

http://search.yesterdaystractors.com/cgi-bin/viewit.cgi?bd=ferg&th=103738
 
The pin from this site was supposed to be 4 3/4" long and it was 5 1/2" long. The hole for the bolt was 1 inch instead of 7/8". The one from this site did not have a slot to put the crank handle thru and the Agco pin was made correctly and better made. If you find that thread you will see the pics I posted of them side by side.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top