TO20 oil filter cover spring

GL59

New User
posted this question on the the Massey Ferguson forum and thought i'd try it here too.

I've been working on a Ferguson TO20 tractor and need the oil filter cover spring. Would anyone know of a source to purchase this spring or the size dimensons so I can get something close at the hardware store? i could also use the copper looking washers on the filter cover bolt and drain plug. would fitting up the copper washers at the auto parts store be wise?
 
I don't know about getting the spring for the filter, but the copper washers should be at the auto parts store they're used for brake lines.
 
thanks for the reply, i"ll give the auto parts store a try. here are some answers to questions I asked about the filter cover spring that could be helpful to others with the same problem.

http://www.yesterdaystractors.com/cgi-bin/viewit.cgi?bd=mf&th=141963
 
thanks for the measurements. i got my spring in from Jack"s small engine and i beleve it is about the same.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top