FERGUSON TEA Valve Rockers and Rocker Shafts

John(UK)

Member
I keep getting asked for Rockers and Rocker Shafts and all the other parts that make up the Valve Gear on a Standard Motors carburettor engine, as fitted to the TEA's and TED'S or 35's and 135's & FF30GS. I have approached a big parts supplier about making them available again and they are going to look into it. To try and give them some idea of how much interest there is and hopefully which will encourage them to manufacture. Would anyone who MAY have an interest in these parts email me at the address below NOT on the Forum here or they won't be included. This is not obliging you to place an order, we would just like some idea of how many would have an interest in these parts if they were available. Please tell me what parts of the Rockers in which you have an interest if it isn't the complete Assy. At the same time, could you also let me know if there is anything else that you would like to see made available again for the TE20/TEA/TED/TEF/TO20/TO30/TO35/FE35/MF35>>both USA & UK 35 models, say which model in case there is maybe a difference between the USA and UK models) PLEASE REPLY ONLY to this address >>> [email protected].

I am hoping that we maybe able to get some parts manufactured again that we have been missing for so long, but unless we know we will not be able to persuade them..John(UK)[email protected]
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top