John Deere 350C Tach Cable

1970-1655 · Jan 13, 2013

Next up on my list of little things to fix on my 1979 350C John Deere is the tachometer cable. I pulled it loose at the tachometer and turned the engine over. Cable never moved. I tried to pull the cable out of the housing to check but it only comes up about 1". How do I go about changing the cable? The engine end is located deep on the rear of the engine and tight to the dash assembly.

Bob Bancroft · Jan 13, 2013

Many of them have a piece crimped on one end which means they can only come out one way.
I imagine your cable assy. is the old braided steel type. I would replace the whole assy. anyhow.

farmerscotty · Jan 13, 2013

you can buy a generic cable at the auto parts store that might work. Take yours out and see what they have before you go to JD to get one. I have done that on several rigs and works fine.....you cut them to length and crimp an "end" on the cable.
Outside wood furnace forced air system.

John Deere 350C Tach Cable

1970-1655

Member

Bob Bancroft

Well-known Member

farmerscotty

Member

Similar threads