Any forklift guys out there???? (pictures)

biggerred

Member
I bought this mast several years ago, and had the info written down about the machine it came from, but it"s long gone. I"ve done a 3pt conversion on it to use with my tractors. Problem now is, one of the tilt cylinders is leaking pretty good out the shaft, and I need a kit for it. If anyone can tell by the pics what brand it is (I was thinking it was in the 6000lb range) or model I"d be mighty thankful!!
a95498.jpg

a95499.jpg

a95500.jpg

a95501.jpg
 
Since it's an older mast finding a true kit will probably not be possible. If it is it would come through a dealership and cost twice, or three times what the parts are worth. That said if it were mine, or belonged to a customer of mine, I'd tear it down and take the seals to a hydraulic supply house and let them match the parts up. This shouldn't be that hard for them to do and will more than likely save you alot of money over getting a 'kit'.
 
It's an Allis Chalmers Mast. I worked for an AC dealer for 7 years. Part# for the tilt cyl. kit is 4906332. Part # for the lift cyl. packings is 4906100. Any forklift dealer should be able to take these numbers and get the kits for you aftermarket.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top