Gehl skid loader--5625sx model

Icuby

Member
This has a 4 cyl perkins diesel and it needs a flywheel ring gear for the starter. What may the procedure be to install this gear? I am thinking to pull the cab and the engine? Anyone ever done this? Thanks
 
Just remove the tandem pump then remove the bell housing adaptor plate and then the drive coupler. Can’t remember but it would be a good idea to support the front of the engine from the bottom with a little bottle jack. Unbolt flywheel and heat ring gear up then take punch and hammer hit it off. Heat up new ring gear and tap it onto the flywheel. When you remove the tandem pump cap the hydraulic lines or drain the hydraulic oil. Do you have a later built 5625 or earlier built one. Earlier built ones use serial number 8868. Earlier machines use a Perkins 4.154 later machines use 204.25. Anymore questions will have to remove the covers over the control handles first.
 
Thank you Wis.cowman. Another ?,does the cab have to come off or just tip back and does the engine have to be taken out of the machine? Serial # unknown at this time Thanks
 
Thanks. Very helpful information. When I get to this project and have any problems I might call on you again. Again,Thank you
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top