(800) 853-2651
SHOP NOW

hydraulic pump

K

Kevin Hawes

New User
does anybody know where i can find a hydraulic vickers pump for a international 3200a the only numbers that i can read is 1s8s 1d11 there might be a w and a c before the numbers but not sure
 
called vickers and numbers don't cross over due to age and international sold out years ago and they can't use them for any info on the pump
 
My advice is to find the manual on your tractor, Ebay or online somewhere, and then find out what the pump is, vane, gear, Gerolor. And find out the GPM and Pressure of the pump and you may be able to get anybrand that fits the shaft size and hose arrangement.
 
Just because that person told you that i would call another supplier as they do have the parts just gots to get the rite person been there done that.
 
Either get the GPM/speed rating or the cubic inch/revolution displacement of the pump, the direction of rotation, the drive type and the mounting pad type... then go buy a pump.
It's not worth screwing with a worn out leaking vane or gear pump.

Rod
 
The numbers/letters are the model code, and
should be stamped into a flat spot on the pump.
they tell you everything about the pump-gals
per min., shaft,port size, etc.
You"ve got part of a good number, but not all,try
to get the flat spot cleaned better--rub some
chalk into the numbers/letters so they stand out.
I"ve got a complete set of Vickers master parts
books, and should be able to help you.Parts are
available through vickers distributors. Vickers
is now part of Eaton.
 
Is there anything unusual about that pump that it can't be replaced with a different brand pump? Most of those pumps are pretty generic in their mounting. You posted that it was the hydraulic pump, just wanted to make sure that it isn't one of the hydrostatic pumps.

Those skid loaders were made for IH, not by IH. Massey Ferguson sold the same unit with different paint.
 
You must log in or register to reply here.

Similar threads

T
John Deere 2010 hydraulic pump
Replies
5
Views
294
DRussell
D
mdm1
Hydraulic pump leaks.
Replies
6
Views
372
mdm1
mdm1
D
Please help Ford 1910
Replies
10
Views
430
wore out
wore out
motoOzarks
Simms injector pump question
Replies
6
Views
573
Dieseltech
D
M
Seal kit needed for FoMoCo loader
Replies
6
Views
269
Andy Wickiser
A
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top