(800) 853-2651
SHOP NOW

stabilizers for 3pt lift arms

A

Anonymous-0

Well-known Member
Hey folks,
I've been seeing on some old tractors here a set of chains w/ turnbuckle mounted from the arm to a point near the rear axle that keeps the arms from swinging back and forth. These are in addition to the criss-cross chains that are there. What I have now is two steel bars that hook up on the pins of the implement and are a real PITA.. Any ideas, or does someone sell something that meets the description?

Thanks, Dave
 

Not familiar with your tractor, but the difficult part would be getting turnbuckles, otherwise you could get some chain and make your own.

If there is a tractor salvage yard you could maybe get a set of chains from a junker. Long and the other Fiat clones use chains with turnbuckles.

Zetor uses square telescoping tubing with holes in the inner and outer tube to take up slack. Possibly you could rig up something with telescoping tubing if you can't find a junk Zetor.

KEH
 
You must log in or register to reply here.

Similar threads

3
2pt-3pt conversion ? on 300 U
Replies
16
Views
492
BarnyardEngineering
BarnyardEngineering
C
Bad lift arms
Replies
1
Views
420
lha
L
F
3pt Stabilizer bar for Massey 35
Replies
1
Views
598
Tslinger
T
R
lift arm length
Replies
15
Views
2K
rambofirstblood
R
3
3pt lift arms Ford 4000
Replies
3
Views
416
Ultradog MN
Ultradog MN
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top