IHC M GOVERNOR

Anonymous-0 · Oct 9, 2009

carb remove to clean-now it wont idle-the governor wont slow down

farmallguy3 · Oct 9, 2009

if you didnt get the governer shaft key in slot on the carb correctly the tractor will go to wide open upon starting. you will have to take the carb off and check the governer shaft. i alway hook the governer up before i attach to manifold.

Anonymous-0 · Oct 9, 2009

thats what happen the first time-reinstall carb-
idles hi needs just little bit to pull it down

farmallguy3 · Oct 9, 2009

you can adjust the idle screw out and it will allow the tractor to idle lower. the idle screw is right where the governer attaches to the carb hope this helps .

IHC M GOVERNOR

Anonymous-0

Well-known Member

farmallguy3

Member

Anonymous-0

Well-known Member

farmallguy3

Member

Similar threads