justanothercase
Member
would have posted sooner but have been super busy so im not on the computer much. We got the tractor out on saturday without problems. used two achor points(payloader and four wheel drive with dozer) and a couple cables and pulley system and pulled it right up what was left of the bridge after torching the hitch off the air seeder. didnt take any pics was too busy helping to get everything set up, im supposed to be getting some emailed to me and i will post when i get them. after tractor was out they just filled in with dirt until the payloader would get under the seeder and picked it up and put it back on the road.
Tractor wasnt hurt too bad front cast broke and frame will need to be straightened or cut out and new welded in as it banana'd out on both sides, wreck some ac stuff, and bent the drawbar slightly up. they got pretty lucky, especially since noone got hurt when it fell and getting everything back out.
Allen in NE asked where it happened, it was about 15 miles southwest of Hettinger, ND right on the south dakota side of the border.
sorry for the long post just trying to cover as much as i could.
Tractor wasnt hurt too bad front cast broke and frame will need to be straightened or cut out and new welded in as it banana'd out on both sides, wreck some ac stuff, and bent the drawbar slightly up. they got pretty lucky, especially since noone got hurt when it fell and getting everything back out.
Allen in NE asked where it happened, it was about 15 miles southwest of Hettinger, ND right on the south dakota side of the border.
sorry for the long post just trying to cover as much as i could.
