8N ford oil hookup for loader

BLP · Apr 22, 2009

The plug off the hydraulic pump is a 1/2 inch ,20 threads per inch. with a copper washer to seal it. Looking for the fitting to attach the loader oil lines. Any help. Bruce

old art · Apr 22, 2009

did your loader come off of a ford thactor if not the hydrolicks will not make the losder move very fast as the pump is a low volum high pressure look into how it was connected on the preveious tractor you may want a front mounted pump system good luck. old art

Bob · Apr 23, 2009

It would be easy to make one on a lathe from a piece of hex stock.

Or, drill a hole in a bolt and weld a 3/8" pipe coupling to it.

Or, find an original adapter... here's one I have:

<img src = "http://i167.photobucket.com/albums/u125/27Grainfield/N%20Ford/testportfitting.jpg">

Or post over at the "N" Forum. One of the guys has found a modern "O" ring hydraulic fitting that works. I don't quite know how, since there's no counterbore or chamfer on the pump cover for the "O" ring.
Untitled URL Link

teadave · Apr 23, 2009

any hydraulics shop can get you the correct fitting(even princess auto here in canada keeps them on the shelf) it is a #5 orb.

8N ford oil hookup for loader

BLP

New User

old art

Member

Bob

Well-known Member

teadave

Member

Similar threads