(800) 853-2651
SHOP NOW

Mid-mount scraper blades on tractors?

G

Gun guru

Well-known Member
Has anyone made or bought a mid-mount blade for a tractor for grading gravel roads and driveways? I would love to have a mid-mount scraper blade for doing this. Hydraulic up/down pressure with the tractor weight to get real heavy cutting pressure.

If you have then post a picture or an explantion of how you did it.
 
here are somepics of a mid mount blade i saw a while back on a cub. i have one of these blades, but it gets used on my b as a snow plow. maybe it would give you some ideas
poke here
 
here are somepics of a mid mount blade i saw a while back on a cub. i have one of these blades, but it gets used on my b as a snow plow. maybe it would give you some ideas
poke here
 
I used the front cultivators on a cub to hang a mid mounted blade on. Used a shank on each side without the shovel. Hung a concave off a Massy Harris 50 clipper combine for the blade in front of the shanks. Set them at an angle, Worked really good for snow and dirt. Going to make another one. rw
 
I have a picture in a book of an MF workbull with extended front wheels and a bullgrader attachment. Kind of like a smaller grader. Dave
 
a ford 901 or similar mod. with wide front is a perfect candidate for such a machine. plenty belley clearence and long wheelbase between wheels, plenty room for blade to swivil.
 
Something like a huber maintainer, can't remember what manufacturers but there were a few either offered by the factory or aftermarket, just can't remember what ones I have seen and who made them. You see them for sale every so often, and seemingly reasonable, as it does not seem there is a lot of em around.
 
Like this, a modern version, forget they still make these, they go back some years, I thought I have seen Fordsons converted to something like these, and some others, have seen a few different ones, short on memory today.
Huber Maintainer
 
You must log in or register to reply here.

Similar threads

D
Rear mount sickle mower for Super C w/ mid mount belly mower
Replies
6
Views
434
gene bender
G
T
What do think, snow blade
Replies
3
Views
915
stevieb49829
stevieb49829
L
JD M-20 Sickle Mower info/parts
Replies
6
Views
474
Landry
L
P
JD AR Hydraulic Ram Mount / Display
Replies
5
Views
281
Mark-Ia
M
L
Ford 3000 with Westendorf Loader For Sale (Thoughts?)
Replies
3
Views
241
Lynn Patrick
L
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top