I am currentally working on getting the C back together. Im to the crank and bearings now. I've shimmed the mains to 3/1000 and they still turn very hard, the crank doesnt want to move at all. Shim it more???
Same thing with the rods, but worse. I know the shims cant come in contact with the bearings at all, and they are very hard to cut with heavy sissors and a hole punch, and if i used more then one layer of pop cans there im afraid that, in installing the cap, i could push one of the shims down into the bearings. Any ideas here???
Same thing with the rods, but worse. I know the shims cant come in contact with the bearings at all, and they are very hard to cut with heavy sissors and a hole punch, and if i used more then one layer of pop cans there im afraid that, in installing the cap, i could push one of the shims down into the bearings. Any ideas here???