Cub cadet lawnmoer

I am thinking of purchasing a cub cadet to build I was wondering which cud cadet has the strongest rear end I have something special in mind to put in it for a motor

Thank you!
 
Most of the tractor pullers use a Dodge Dart rear end in them. You might want to look into
that. Anything more that you can get out of a well running Briggs you will want that.
 
Late model with aluminum rear end housing, the whole thing not just the axle housings.
Think 1806,1535 or 1050.
 
Like this one I saw at the show in AZ last year? You might get more advice on the garden tractor board.
cvphoto149957.jpg
 
The bearing carriers that support the differential itself will fail, they're aluminum. Not sure why. Midwest
Supercub makes all kinds of garden tractor pulling parts for Cub Cadets, they have a great website. And when
the carriers fail it normally makes the rear casting scrap iron.
The roll pins in the driveshaft are probably the next weakest part. Talk to Julian Stahl, owner of Midwest
SuperCub, tell him what you want to do.
Used to be a really active tractor pulling club around south-central Wisconsin, garden tractors and
antique farm tractors, up to 4020 Deere-size. SON & I went to a pull at least every other weekend. Was funny
to see all the off-brand garden tractors that had hex shaped rear axle carriers!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top