(800) 853-2651
SHOP NOW

Can Y'all Identify The Weights That Fit The Home-Made M

8

8NChris

Member
Can Y'all Identify The Weights That Fit The Home-Made Mounts?

Ends measures 12 1/8" and 11 7/8" where they are welded to the rim. I figure it would be a 12" on 3 or a 6" on 6 mount. It is too big to be a Miniapolas Moline (C model I think).

Thanks'


mvphoto98910.jpg



mvphoto98911.jpg


This post was edited by 8NChris on 10/28/2022 at 05:08 pm.
 
(quoted from post at 14:02:27 10/28/22) Can Y'all Identify The Weights That Fit The Home-Made Mounts?

Ends measures 12 1/8" and 11 7/8" where they
Click to expand...
EDITED FOR TYPE O. My eighth measurements symbols didn't take.
 
It's NOT for Farmall weights, they all have 4 bolts 90 degrees apart, not positive about Massey Ferguson but
I'm pretty sure they have 4 bolts 90 degrees apart. Those bolts could be for Deere weights, they use 3 bolts
for weights.
 
(quoted from post at 15:45:49 10/29/22) It's NOT for Farmall weights, they all have 4 bolts 90 degrees apart, not positive about Massey Ferguson but
I'm pretty sure they have 4 bolts 90 degrees apart. Those bolts could be for Deere weights, they use 3 bolts
for weights.
Click to expand...
hey don't fit the John Deere 38" wheels. Still looking measuring photos to scale with a dial caliper. The 38" use a 16" or so bolt spread.
 
Maybe you're trying to address the wrong problem?

Instead of scratching your head bald trying to figure out which weights fit, why not modify the wheels to fit weights you DO have?

Even if you did figure out which weights fit those bolts, you may be hunting for them for months or years, and they won't be right for the tractor.
 
(quoted from post at 08:57:45 10/31/22) Maybe you're trying to address the wrong problem?

Instead of scratching your head bald trying to figure out which weights fit, why not modify the wheels to fit weights you DO have?

Even if you did figure out which weights fit those bolts, you may be hunting for them for months or years, and they won't be right for the tractor.
Click to expand...
ersonal decisions I'll make when I have the facts. Thanks'
 
You must log in or register to reply here.

Similar threads

jd2cyl1943
Here's the story of my JD Bs restoration up to this poi
2
Replies
26
Views
2K
jd2cyl1943
jd2cyl1943
J
This old man is BEAT tonight!!!! Fun times in the heat!!!
Replies
13
Views
2K
Andy Martin
A
L
Saturday the 14th
Replies
13
Views
4K
Inno
I
W
How To Buy That First Homestead Tractor
Replies
1
Views
901
Anonymous-0
A
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top