Baler question

grandpa Love · Sep 5, 2021

Got an old Allis Chalmers 303, will this wagon hitch fit on my New Holland 315?

Sure would be handy if it did!!

coonie minnie · Sep 5, 2021

With a torch and a welder, most anything fits.

grandpa Love · Sep 5, 2021

Lol. No torch. Flux core wire welder.....

RogerinIowa · Sep 5, 2021

Doesn't look very strong!

MJMJ · Sep 5, 2021

This post was edited by MJMJ on 09/05/2021 at 05:13 pm.

MJMJ · Sep 5, 2021

Looks like the deciding factor is just the diameter of the frame. Even if it doesnt match there is probably an easy way to make it work. Though I agree it doesnt seem too strong considering the weight it will be pulling.

Wheat47 · Sep 5, 2021

What you gonna do with the baler?
I need a few parts.
They seemed to be a good baler, what little I used one.

wh · Sep 5, 2021

Shame you arent a little closer. Could easily beef that up and make it fit your baler. I would think a long 45 degree brace to the right would improve it. Could also strengthen the pipe as well.

grandpa Love · Sep 5, 2021

Wheat 47.....Guy wants it for yard art. What parts you need.? I can pull em off.... Email me [email protected]

old · Sep 5, 2021

I could make it work but I'm to far from you. LOL I've made my own a number of times

steve_in_mo · Sep 6, 2021

What you said. ^^

steve_in_mo · Sep 6, 2021

You can do the same with a hack saw or sawzall. The torch is just faster.

BarnyardEngineering · Sep 6, 2021

(quoted from post at 16:31:44 09/05/21) Lol. No torch. Flux core wire welder.....

Don't you think it's time to make the investment in both? It's Federal Law that if someone owns as much equipment as you do you are required at minimum to have an ancient 220V stick welder or a Lincoln AC225 tombstone welder, and an oxy-acetylene torch.

Baler question

grandpa Love

Well-known Member

coonie minnie

Well-known Member

grandpa Love

Well-known Member

RogerinIowa

Member

MJMJ

Well-known Member

MJMJ

Well-known Member

Wheat47

Well-known Member

wh

Well-known Member

grandpa Love

Well-known Member

old

Well-known Member

steve_in_mo

Well-known Member

steve_in_mo

Well-known Member

BarnyardEngineering

Well-known Member

Similar threads