Rear wheel weights 5310 jd

crowspond · Nov 2, 2020

Going to salvage yard to get weights for above tractor with loader do they usually put 2 weights on each side they are 110 per weight

caterpillar guy · Nov 2, 2020

All depends on how much you intend to lift. We have about 1200 on the rear with the chloride in the tires. 1 bF&H weight with 1 IH on the outside and 2 old case weights on the inside this is on each wheel plus the chloride in the tires.

WESnIL · Nov 2, 2020

That depends upon your use and application. My loader tractor has 3 weights on each side, no fluid, and a 55 gallon barrel with concrete on the three point. That gives some nice counterweight. The barrel is the most effective as it is further away from the front axle, your fulcrum in a tractor with loader application. My other tractors have one or two weights in each rear tire. For my eyes a rear tractor tire without one weight looks naked and/or incomplete.

crowspond · Nov 3, 2020

Thanks for the reply going with 2 wheel weights on each side

Tx Jim · Nov 3, 2020

Have you considered adding rear counterbalance weight on 3 pt hitch which will relieve more stress/wear on frt axle than rear wheel weights

Rear wheel weights 5310 jd

crowspond

Member

caterpillar guy

Well-known Member

WESnIL

Member

crowspond

Member

Tx Jim

Well-known Member

Similar threads