Looking for good used parts.

Brent Zappe · Jul 3, 2020

I have a 1974 I.H. model 674 (diesel engine 239 4 cylinder). Looking for a person out her who will direct me to these parts which I can not find in All state catalog. I need two straight push rods, a good oil screen for the oil intake tube, For some strange reason I can not get these engine parts form the tractor supplies. I will be at a latter date looking for other stuff for this International Harvester tractor. My engine parts are almost all here and I am almost ready to build it but I need these two parts .

Absent Minded Farmer · Jul 3, 2020

Check with Bates Corp. Good chance they might have what you're looking for.

Mike

David G · Jul 3, 2020

Used push rods and pickup should be available, if not I bet Jon F could weld that pickup.

Dieseltech · Jul 3, 2020

Xs two Bates Corp, 800 248 2955

CenTex Farmall · Jul 3, 2020

A good TIG welder can fix the oil pump screen if nothing else works out.

Janicholson · Jul 3, 2020

Tig weld, and Bates will do it. Jim

UncleTom · Jul 3, 2020

even a torch and a coat hanger would fix that pickup just as well as a tig.

Brent Zappe · Jul 3, 2020

I wish this would work on this but there is a problem with that. This one already had a person do a bad repair job to it. this picture makes it look better than what it is.

caterpillar guy · Jul 3, 2020

Could even be brazed and hold well enough on that. Can the push rods be checked against another engine and used?

Janicholson · Jul 3, 2020

A good TIG or Gas welder can do it. Jim

Looking for good used parts.

Brent Zappe

Member

Absent Minded Farmer

Well-known Member

David G

Well-known Member

Dieseltech

Well-known Member

CenTex Farmall

Well-known Member

Janicholson

Well-known Member

UncleTom

Well-known Member

Brent Zappe

Member

caterpillar guy

Well-known Member

Janicholson

Well-known Member

Similar threads