Having to replace the starter on my 884. Ordered one from this site and received it yesterday. With the loader on the tractor this will not be an easy chore, so I want to be sure I'm right. My concern is that the new starter is boldly marked "clockwise." Is this correct? The starter mounts to the forward side of the flywheel. Curious to know from what perspective the rotation direction is determined--facing the starter motor end or facing the gear end?
- Thread starter cool hand
- Start date
Steve@Advance
Well-known Member
Easy enough to check.
The drive gear will turn one direction, lock the other. Which ever way it will turn is the direction the starter motor will run. Being new, it may be difficult to turn, might need to use pliers to turn it.
Holding the starter in the position it will mount, knowing the direction the engine runs, compare the rotation of the drive gear will turn the flywheel.
The drive gear will turn one direction, lock the other. Which ever way it will turn is the direction the starter motor will run. Being new, it may be difficult to turn, might need to use pliers to turn it.
Holding the starter in the position it will mount, knowing the direction the engine runs, compare the rotation of the drive gear will turn the flywheel.
Janicholson
Well-known Member
Both are used dang it. I would jump it with cables (put it in a vise. or stand on it!) almost all engines turn clockwise standing on the non drive end. Thus if your starter mounts on the engine side of the FW, the starter must turn CCW from the end frame point of view, and CW from the drive cone end. Jim
caterpillar guy
Well-known Member
Just use a screw driver the check the drive slip, if the same it will work, if not then return.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy