I was cleaning up in my garage and found a new set of (3) finishing mower blades for a 5' woods 3 pt mower. I know longer have the mower and have no use for the blades. If someone has use for the blades let me know. They're new still in the box and free for any one that can use them. I'm not sure what shipping would be but I would think lots less than a new set of blades. If I remember correctly they weren't cheap when I bought them a couple of years ago. I cant remember the model number but if someone wants me to get measurements I will. (985) 514 0418
- Thread starter Tar Baby
- Start date
Dollar Bill
Member
If your mower looked like this, I am very interested in the blades.
Dollar Bill
My mower didn?t have the belt that runs up high. It ran
Flat right above the deck. I will get some measurements
if you would call me later. I was gonna post the measurements
but there doesn?t seem to be much interest. I was just hoping
someone could use them. I will get the part number for you
if that will help. Thanks
My mower didn?t have the belt that runs up high. It ran
Flat right above the deck. I will get some measurements
if you would call me later. I was gonna post the measurements
but there doesn?t seem to be much interest. I was just hoping
someone could use them. I will get the part number for you
if that will help. Thanks
Dollar Bill
Member
Tar Baby, thanks for the follow up.
According to the parts book, mine take a 20-1/4" X 5/8" blade and the Woods P/N's are as follows:
CCW 20-1/4" High lift blade (Standard) 31359
CCW 20-1/4" Low-suction blade 25997
Your blade may still fit - Post the manufacturer and part numbers for what you have and I'll look them up.
According to the parts book, mine take a 20-1/4" X 5/8" blade and the Woods P/N's are as follows:
CCW 20-1/4" High lift blade (Standard) 31359
CCW 20-1/4" Low-suction blade 25997
Your blade may still fit - Post the manufacturer and part numbers for what you have and I'll look them up.
Dollar Bill
Member
The 34615 part number has the same dimensions and rotation (CCW) as the part numbers for my mower.
Please let me know how much you need to get them to me in Keystone Heights, FL 32656.
Please let me know how much you need to get them to me in Keystone Heights, FL 32656.
Dollar Bill
Member
Please disregard my last. I did further checking and it appears your blades cut in a clockwise or right handed. My mower turns counter clockwise or left handed.
Sorry for the trouble - Merry Christmas!!
Sorry for the trouble - Merry Christmas!!
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy