I'm thinking about putting a pipe on my skidsteer bale spike to raise some trusses onto the exterior walls I haven't determined the length of pipe but probably ten feet. I have 2"galvanized that will slip over the spike. Is this a good idea? The spike is of good quality. It may not need to be that long because it's ten feet to top of wall and add 4 feet to peak. The trusses aren't very heavy.
option 2 is use forks and attach a T to the pipe about three ft from end and place it across the forks on top and under the fork bracket and secure so it won't move.
option 2 is use forks and attach a T to the pipe about three ft from end and place it across the forks on top and under the fork bracket and secure so it won't move.