(quoted from post at 13:05:19 06/20/18) We typically design a 3 to 1 (1 foot of rise per every 3 feet) slope max for mowers to be able to function safely on a slope. I personally would not want to go up or along a slope much deeper than that. I loaded my old '44 A onto a buddies gooseneck trailer one time and the ride up and on about scared the crap out of me.
(quoted from post at 06:38:46 06/20/18) thanks rusty - that's what worries me.....
(quoted from post at 15:42:42 06/20/18) Morning pic, wheels out to Max end of axles, 88" to outside of tires. Is there much diff in side-to-side stability felt if I move tires in to 80"? And any comments about down the road driving w/ wheels set in vs out at Max 88" ?. Thanks
(quoted from post at 07:42:42 06/20/18) Morning pic, wheels out to Max end of axles, 88" to outside of tires. Is there much diff in side-to-side stability felt if I move tires in to 80"? And any comments about down the road driving w/ wheels set in vs out at Max 88" ?. Thanks
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy